Switches - Small Business

Bonjour, actuellement j'ai un problème avec la série sg350. j'ai plusieurs VLAN, j'active bien l'igmp comme il se doit mais l'election auto du querier ne marche pas (enfin si mais que dans le vlan 1). l'adresse du querier affiche tout le temps 255.25...

Hello friends, I need help solve my problem. I have 4 switches (two SG350X-48P and two SG350X-24P, all updated on last firmware version.) and I need join them to the stack. If I use metallic cables on XG1 and XG2 ports, everythings go fine and stack ...

Can anyone help me to configure the port based address allocation feature on SG350 - 28 (Firmware version is 2.5.0.83)  series switch.Description of requirement : I have several devices to test one by one. whenever, I connect the new device to be tes...

Hello, I have a Cisco SG350-10P Switch. My POE Devices do not power up after a reboot. I have to go into POE settings and toggle Class / Port settings, then the devices power up. I have saved the running config file as the startup file and even expor...

I want to Stack two SG 350X-48P Switches using the 1000Base-SX MGBSX1 Modules in two different Rooms.The Switches use the same Firmware and I've resetted the Slave-Switch according to the Stacking Troubleshooting guide provided by cisco and only conf...

I have never played with Private VLANs.   I have an SG300.  All ports are in VLAN 1.   The switch is connected to the inside interface of my ASA5505.  I have a work laptop and it seems that the IP addresses from my work VPN are showing up as inside m...

Hello, I'm looking for confirmation that the only difference between the SG350-10P and SG355-10P models is the internal/external PSU. I've read the datasheet and quick start guide but can't find a definitive answer.  Any help would be appreciated. Th...

Please i need an urgent help. We have a primary number 81026888 in our organisation, when we forward calls from our internal DN to mobile number it alwaays show the primary number 81026888 but now it is showing 81026000, which is a number assigned to...

the LEDs on all ports light up together once short and once longerwhich error has my switch ? is there a solution ?

Hi there, Thanks for reading. I have SG220 switches which are cycling through blocking, learning & forwarding.  We've gone through the building and removed mini switches but the problem continues.  Here's what it's logging (and it repeats throughout ...

Aloha! I am trying to get time-range scheduling working so that a PoE port is turned off for 1 minute each day to bounce a device plugged in.In testing, I was able to get the time-range to work by setting a periodic to come on for 1 minute. I watched...

Hi! We run SG350X-48 in stack with SG350XG-24F in L3 mode. And we have issue with ARP table building. I dont see any problems in logs but ARP table building is wery slowly. If any host missing in ARP table and i do ping, it takes one, two or sometime...

Hello, I have a sg300 and suddenly the manage vlan is not working.Please see my config below. the trunk interface is ge25the interface is up and running.  SG300-WAN#show runconfig-file-headerSG300-WANv1.3.0.62 / R750_NIK_1_3_647_260CLI v1.0set system...

Does anyone know, what is the standard CPU usage for the SG350X, when network core is used, it is stacked and with RSTP active?Currently he is always averaging 56%. Thanks!