Cisco SG200-50 MAB

[jorgefer00]

Hi, does anybody know why the Cisco SG200 series admin guide say they support Mac Authentication Bypass but in the real world switches the feature does not appear at all? I really need to get working the MAB on these switches so if anybody knows if it is possible or not please help me out.

[Glenn Martin]

the SG200 and 300 series uses 802.1x for Port based authentication. See:

• https://supportforums.cisco.com/document/13004701/8021x-properties-configuration-200300-series-managed-switches

and

•  https://supportforums.cisco.com/document/13007121/view-8021x-extensible-authentication-protocol-eap-traffic-statistics-200300-series

If this information helps please select endorse and rate this answer.

Thanks

[Markus.Richter]

Hi!

although this topic is two years old an might be outdated, I'm facing the same problem with our SG200-26 on FW 1.4.9.4.

The Admin Guide (https://www.cisco.com/c/dam/en/us/td/docs/switches/lan/csbss/sf20x_sg20x/administration_guide/Cisco_200Sx_v1_4_AG.pdf) on page 276 describes the feature of using MAC based Authentication but the GUI does not show this option.

Can you give me a hint what I'm doing wrong here?

Thx

Markus