03-08-2010 05:33 AM
SRW / SGE switches are sending packets like this below:
IP 172.16.57.100.1900 > 239.255.255.250.1900: UDP, length 296
IP 172.16.57.100.1900 > 239.255.255.250.1900: UDP, length 313
(a discovery message to the multicast address 239.255.255.250 on port 1900 via the UDP protocol)
Can this behaviour be disabled ?
Solved! Go to Solution.
03-10-2010 08:42 PM
It looks like this is for uPnP.
This is normally coming from a windows machine, are you sure that it is coming from the switch?
For the switch, here is an admin guide:
These are platform specific, however you basically need to disable upnp if it is a bother to you. It is harmless for the switch to send however if you simply want to ignore it.
HTH,
Andrew Lissitz
03-10-2010 08:42 PM
It looks like this is for uPnP.
This is normally coming from a windows machine, are you sure that it is coming from the switch?
For the switch, here is an admin guide:
These are platform specific, however you basically need to disable upnp if it is a bother to you. It is harmless for the switch to send however if you simply want to ignore it.
HTH,
Andrew Lissitz
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide