09-22-2014 08:42 AM
Is there a way to do switchport port-security violation {protect | restrict | shutdown} in SG-500-28P in case of a BPDU Guard violation?
Seems like the default option is shutdown and I don't know how to change it.
Thank you!
09-22-2014 06:06 PM
Hi,
you can recover this Violation.By using below command:
To enable automatic re-activation of an interface after an Err-Disable shutdown,
use the errdisable recovery cause Global Configuration mode command. To
disable automatic re-activation, use the no form of this command.
Syntax
errdisable recovery cause {all | port-security | dot1x-src-address | acl-deny |
stp-bpdu-guard | loopback-detection | udld }
no errdisable recovery cause {all | port-security | dot1x-src-address | acl-deny |
stp-bpdu-guard | loopback-detection | udld }
For more information:
Refer this URL:page no :406
http://www.cisco.com/c/dam/en/us/td/docs/switches/lan/csbms/Sx500/cli_guide/CLI_500.pdf
regards
Moorthy
09-24-2014 01:27 PM
Thank you for your reply.
Unfortunately, this command is not available in Global Configuration mode. Is it for a different firmware version?
Here is the output of show version:
Unit SW version Boot version HW version
------------------- ------------------- ------------------- -------------------
1 1.3.0.62 1.3.0.03 V01
09-24-2014 06:53 PM
Hi
Try with the latest firmware and boot code of 1.4.0.88 .Before upgrading this version you need to upgrade the firmware and boot code of previous version 1.3.7.18
Use below URL to download the firmware:
http://software.cisco.com/download/release.html?mdfid=284099526&softwareid=282463181&release=1.2.0.97
regards
Moorthy
09-25-2014 05:56 AM
Thank you for your reply.
Can't I just go from 1.2.0.97 to 1.4.0.88 directly?
09-25-2014 06:47 PM
Hi,
If you try to upgrade from 1.2.0.97 to 1.4.0.88 you may face issue.Kindly upgrade from 1.2.0.97 to 1.3.7.18 then to 1.4.0.88.
regards
Moorthy
09-28-2014 07:47 PM
I will give this a try. Thank you!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide