09-28-2014 07:23 AM
Guys,
I have been trying to figure this our for hours and I know it must be something simple. I have SG300-52p switch. I have configured my DHCP pool for one vlan, enabled DHCP server and nothing is getting issued IP's. I want to issue IP's on Vlan 20.
Below is my config:
config-file-header
ZEUSSW1
v1.3.5.58 / R750_NIK_1_35_647_358
CLI v1.0
set system mode router
file SSD indicator encrypted
@
ssd-control-start
ssd config
ssd file passphrase control unrestricted
no ssd file integrity control
ssd-control-end cb0a3fdb1f3a1af4e4430033719968c0
!
vlan database
vlan 10,20,50
exit
voice vlan oui-table add 0001e3 Siemens_AG_phone________
voice vlan oui-table add 00036b Cisco_phone_____________
voice vlan oui-table add 00096e Avaya___________________
voice vlan oui-table add 000fe2 H3C_Aolynk______________
voice vlan oui-table add 0060b9 Philips_and_NEC_AG_phone
voice vlan oui-table add 00d01e Pingtel_phone___________
voice vlan oui-table add 00e075 Polycom/Veritel_phone___
voice vlan oui-table add 00e0bb 3Com_phone______________
ip dhcp server
ip dhcp pool network security
address low 172.32.50.11 high 172.32.50.62 255.255.255.192
lease infinite
domain-name FAKENAME.com
default-router 172.32.50.1
time-server 129.6.15.29
dns-server 8.8.8.8
exit
bonjour interface range vlan 1
hostname ZEUSSW1
username cisco password encrypted 6b283bb060c269432d08ac33b47a337c0a40035d privilege 15
ip ssh server
clock timezone EST -5
clock summer-time EDT recurring usa
sntp unicast client enable
sntp unicast client poll
sntp server nist1-macon.macon.ga.us poll
sntp server nist1-ny2.ustiming.org poll
sntp server nist1-pa.ustiming.org poll
sntp server time-b.nist.gov poll
ip domain name zesuejuice.com
ip name-server 8.8.8.8
ip domain timeout 2
ip domain retry 1
!
interface vlan 1
no ip address dhcp
shutdown
!
interface vlan 10
name DATA
ip address 10.28.144.2 255.255.255.0
!
interface vlan 20
name SECURITY
ip address 172.32.50.2 255.255.255.192
!
interface vlan 50
name temp
ip address 192.168.167.2 255.255.255.0
!
interface gigabitethernet1
switchport mode access
switchport access vlan 20
!
interface gigabitethernet2
switchport mode access
switchport access vlan 20
!
interface gigabitethernet3
switchport mode access
switchport access vlan 20
!
interface gigabitethernet4
switchport mode access
switchport access vlan 20
!
interface gigabitethernet5
switchport mode access
switchport access vlan 20
!
interface gigabitethernet6
switchport mode access
switchport access vlan 20
!
interface gigabitethernet7
switchport mode access
switchport access vlan 20
!
interface gigabitethernet8
switchport mode access
switchport access vlan 20
!
interface gigabitethernet9
switchport mode access
switchport access vlan 20
!
interface gigabitethernet10
switchport mode access
switchport access vlan 20
!
interface gigabitethernet11
switchport mode access
switchport access vlan 20
09-28-2014 11:04 PM
Hi Blabadie,
Please run wireshark on the DHCP client, also you may want to try to change subnet mask to class C.
Regards,
Aleksandra
09-29-2014 06:17 AM
The devices in question are IP cameras, so I will connect a PC on another port and assign it to the same vlan and run wireshark. Changing the subnet is a good idea, I might try that as well.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide