I've got 2 SG300 switches connected to a SimpleWAN Firewall. The Simple WAN device has LAN subnet (I assume VLAN1 default) of 172.168.1.0/24, VLAN50 10.50.0.0/24, VLAN70 10.70.0.0/24, and VLAN200 192.168.1.0/24 all going out of the LAN interface and a DHCP Server for these subnets.
I created VLAN1, VLAN50, VLAN70, and VLAN200 on the switch and left the ports to trunking mode and included all VLANs tagged to the port connected to the SimpleWAN Firewall. I set VLAN200 to be default VLAN on the switches so I can always access it from the 192.168.1.0/24 subnet.
I set a port to VLAN1 and connected something that should be on VLAN1 subnet and traffic doesnt flow. What am I doing wrong? Won't the switch use the SimpleWAN Firewall with DHCP as the router for all the VLAN subnets?