10 Gig ports in Sup6L-E

[sathyanarayana.b]

Hi All,

I am having two sup6l-e sup engines in redundancy mode. I have connected the uplink to nexus switch from 3:1 and 4:1 . And somehow now 4:1 is not working . Hence I want to use 4:2 . But it is showing as inactive. How to make that port active?

Thanks.

[o.melendres]

If supervisor card on slot 3 is active. Guess would use ports 3/1 and 3/2

Maybe supervisor card on slot 4 is on standby

[Jose Solano]

Hi,

Those ports will not be active as you have redundant supervisors and there is no way to just active them, is part of the restrictions on redundant mode.

http://www.cisco.com/en/US/prod/collateral/switches/ps5718/ps4324/data_sheet_c78-530856.html

Hope this helps