02-10-2019 11:20 AM - edited 03-08-2019 05:18 PM
HI we have a smaller office design / collapsed core/agg layer/ access switching looking for a stack of 2 x 48 port cisco switches with some 10Gbase-T ports
is there such a switch ? cat 3850 ? i don't need all 96 ports to be 10G but maybe 12 per switch would be good.
02-10-2019 11:23 AM - edited 02-10-2019 11:25 AM
I would suggest to look new models catalyst 9K, look at 24 port.
https://www.cisco.com/c/en_uk/products/switches/catalyst-9000.html
02-10-2019 05:17 PM
why do you say look at 24 port?
my requirement is 2 x 48 port
02-11-2019 04:17 AM
Apologies, i may read wrong, i was in impression you need 12 port in each switch so suggested 24 X 2 qty.
Later i realized you looking 12 x 10GB ports, look for 48 port x 2 qty.
02-10-2019 03:39 PM
02-10-2019 07:03 PM
You can get 2 48 port 9300 switches. Out of 48 ports, 12 are multigigabit which means they support up to 10Gig (1/2.5/5/10G).
Part number C9300-48UXM
see table-1 in this link:
HTH
02-11-2019 07:57 AM - edited 02-11-2019 08:10 AM
CCW shows
Not sure why. any idea?
02-11-2019 08:08 AM
02-11-2019 10:00 AM
That is just a Gig switch with UPOE. There is no 10Gig port on it. If you need 10Gig ports, the part number I provided you earlier should do it.
HTH
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: