03-03-2011 12:38 AM - edited 03-06-2019 03:52 PM
Hi Guys,
need some advice here im not sure if the interface connector are compatible with each other., i will be setting up my core switches which composes of 2x n7k and 2x 6509 using 10G fiber.
here is my 10G module for n7k: N7K-M132XP-12
interface connector: SFP-10G-SR
here is my 10G module for 6509: WS-X6704-10GE
interface connector: X2-10GB-SR= or XENPAK-10GB-SR
which one will work?
thanks,
marlon
03-03-2011 01:32 AM
Hi Marion,
That SFP-10G-SR should work for your scenario.
Please rate the helpufll posts.
Regards,
Naidu.
08-29-2011 09:31 AM
hi
normaly both of X2-10Gb-SR and XENPAK-10GB-SR will work because all use the same wave lenght
look hear
08-29-2011 09:42 AM
SFP-10G-SR will works with X2-10GB-SR or XENPAK-10GB-SR.
WS-X6704-10GE only accept XENPAK, so your scenario will be SFP-10G-SR on N7K and XENPAK-10GB-SR on C6K with 6704 LC.
HTH,
jerry
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: