cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
1526
Views
0
Helpful
1
Replies
Beginner

10G line card on Cisco Catalyst6509

hi,

Urgent help need

I got one cisco catalyst 6509. As a new project in, i need to add 10G fibre card to install on.

AS the Supervisor engine version is as the following

1000BaseX Supervisor      WS-X6K-SUP2-2GE

in addition, i get MSFC2 card in the box,

I checked the doc about Catalyst6500 10G card module data sheet, I found the supported supervisor engine is 720.

could someone is able to help to confirm whether my box support 10G fibre card or not?

Thank you very much!

1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted
Beginner

Re: 10G line card on Cisco Catalyst6509

As per the datasheet for 10Gig cards for 6500, they are supported only on Supervisor Engine 720

http://www.cisco.com/en/US/prod/collateral/switches/ps5718/ps708/product_data_sheet09186a00801dce34.html

1 REPLY
Highlighted
Beginner

Re: 10G line card on Cisco Catalyst6509

As per the datasheet for 10Gig cards for 6500, they are supported only on Supervisor Engine 720

http://www.cisco.com/en/US/prod/collateral/switches/ps5718/ps708/product_data_sheet09186a00801dce34.html

CreatePlease to create content
Ask the Expert- MPLS troubleshooting