cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
435
Views
0
Helpful
3
Replies
Highlighted
Beginner

2801 WAN and LAN with the FE ports

Hi,

how can i configure a 2801 router without wic modules?

I want configure fe0/0 as WAN and fe0/1 as LAN with dhcp server.

is it  possible  without hwic module?

Regards

Andreas

Everyone's tags (3)
3 REPLIES 3
Highlighted
Beginner

Re: 2801 WAN and LAN with the FE ports

Of course it is possible, you need to check with your ISP about the proper config on the wan interface "static IP/dhcp, duplex,speed,..."
And for your lan interface, just configure the lan IP address with dhcp pool and thats it

Sent from Cisco Technical Support iPhone App

Highlighted
Engager

Re: 2801 WAN and LAN with the FE ports

hi,

yes, it's possible. just make sure you've got an ethernet handoff from ISP.

you'll just need to assign each interface with proper IP addresses: public IP address on the WAN and private IP for the LAN.

Highlighted
Hall of Fame Master

2801 WAN and LAN with the FE ports

Wrong forum, post in "WAN and routing". You can move your posting with the Actions panel on the right.

CreatePlease to create content
Content for Community-Ad