Showing results for 
Search instead for 
Did you mean: 

2911 sizing chart


I have a customer with 4 x isdn 30s and now they wish to add another 2 making 6 -- i can get all the cards 3 x VWIC3-2MFT-T1/E1 and PVDM etc but is there any sizing chart which tells you when to upgrade to a bigger switch and how much capacity in processing  this will be using 

1 Reply 1

Joseph W. Doherty
Hall of Fame
Hall of Fame


The Author of this posting offers the information contained within this posting without consideration and with the reader's understanding that there's no implied or expressed suitability or fitness for any purpose. Information provided is for informational purposes only and should not be construed as rendering professional advice of any kind. Usage of this posting's information is solely at reader's own risk.

Liability Disclaimer

In no event shall Author be liable for any damages whatsoever (including, without limitation, damages for loss of use, data or profit) arising out of the use or inability to use the posting's information even if Author has been advised of the possibility of such damage.


Router sizing often is based on aggregate traffic expected to transit router and its configuration.  The attachment will explain more for ISRs.


Router selection is sometimes hardware component restricted too.  For that, you need to carefully review the device specs and release notes.  E.g. are 3 VMICs supported in a 2911.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: