An interface on 2921 router is not coming up. When I shut/no shut the interface, I see this:
Router#sh log | i 0/2
Oct 17 08:55:06: %IP_VFR-7-FEATURE_DISABLE_IN: VFR(in) is manually disabled through CLI; VFR support for features that have internally enabled, will be made available only when VFR is enabled manually on interface GigabitEthernet0/2
Oct 17 09:00:35: %LINK-3-UPDOWN: Interface GigabitEthernet0/2, changed state to down
Router#sh int gi0/2
GigabitEthernet0/2 is down, line protocol is down
Hardware is CN Gigabit Ethernet, address is e8b7.48ad.92d2 (bia e8b7.48ad.92d2)
Description: Centurylink Circuit ID:ETH100-16332784
Internet address is <>
MTU 1500 bytes, BW 1000000 Kbit/sec, DLY 10 usec,
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation ARPA, loopback not set
Keepalive set (10 sec)
Auto Duplex, Auto Speed, media type is RJ45
output flow-control is unsupported, input flow-control is unsupported
ARP type: ARPA, ARP Timeout 04:00:00
Last input never, output never, output hang never
Last clearing of "show interface" counters never
Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0
Queueing strategy: fifo
Output queue: 0/40 (size/max)
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
0 packets input, 0 bytes, 0 no buffer
Received 0 broadcasts (0 IP multicasts)
0 runts, 0 giants, 0 throttles
