2960-L LAN Lite Configuration Guide

[iswift]

I can find no configuration guide for the LAN Lite feature set  - in particular QOS.

https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst2960/software/release/12-2_37_ey/configuration/guide/scg/swqos.html#wp1331378 
is for the legacy 2960, not the 2960-L.

https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst2960l/software/15-2_6_e/configuration_guide/b_1526e_consolidated_2960l_cg/b_1526e_consolidated_2960l_cg_chapter_010111.html
is the correct model and IOS for me, but contains many commands that are not available in LAN Lite.
For instance you cannot use
auto qos
mls qos trust dscp
you cannot match on anything else than cos value in a class-map.

I suspect the documentation is for LAN BASE not LAN Lite.

Is there any documentation specifically for LAN Lite QOS ?

The only one listed here

https://www.cisco.com/c/en/us/support/switches/catalyst-2960-series-switches/products-installation-and-configuration-guides-list.html

is the old one above.

Ian

[Mark Malone]

Hi
try this commands will still be the same , most the general docs are for just the software version rather than attributed to any license type and contain all commands

Catalyst 2960 Switch Software Configuration Guide (LAN Lite Image)

https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst2960/software/release/12-2_37_ey/configuration/guide/scg.pdf
https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst2960/software/release/12-2_37_ey/configuration/guide/scg/swqos.html