Hi all,
I m facing the problem in reloading the IOS in switch by Xmodem.When i m trying to access the rmode then mesg is displayed "Access is denied".
Full message is given below:
C2950 Boot Loader (C2950-HBOOT-M) Version 12.1(11r)EA1, RELEASE SOFTWARE (fc1)
Compiled Mon 22-Jul-02 17:18 by antonino
WS-C2950G-48-EI starting...
Base ethernet MAC Address: 00:0b:46:e5:b2:00
Xmodem file system is available.
Initializing Flash...
flashfs[0]: 1 files, 1 directories
flashfs[0]: 0 orphaned files, 0 orphaned directories
flashfs[0]: Total bytes: 7741440
flashfs[0]: Bytes used: 1536
flashfs[0]: Bytes available: 7739904
flashfs[0]: flashfs fsck took 4 seconds.
...done initializing flash.
Boot Sector Filesystem (bs:) installed, fsid: 3
Parameter Block Filesystem (pb:) installed, fsid: 4
Loading ""...: permission denied
Error loading ""
Interrupt within 5 seconds to abort boot process.
Boot process failed...
The system is unable to boot automatically. The BOOT
environment variable needs to be set to a bootable
image.
switch: boot
Loading ""...: permission denied
Error loading ""
Interrupt within 5 seconds to abort boot process.
Boot process failed...
switch: copy xmodem c2950-i6q4l2-mz.121-12c.EA1
xmodem: permission denied
switch: copy xmodem c2950-i6q4l2-mz.121-12c.EA1 bin
xmodem: permission denied
switch:
C2950 Boot Loader (C2950-HBOOT-M) Version 12.1(11r)EA1, RELEASE SOFTWARE (fc1)
Compiled Mon 22-Jul-02 17:18 by antonino
WS-C2950G-48-EI starting...
Base ethernet MAC Address: 00:0b:46:e5:b2:00
Xmodem file system is available.
The system has been interrupted prior to initializing the
flash filesystem. The following commands will initialize
the flash filesystem, and finish loading the operating
system software:
flash_init
load_helper
boot
switch: copy xmodem c2950-i6q4l2-mz.121-12c.EA1
xmodem: permission denied
switch: set
switch: unset
usage: unset <variables...>
switch: unset boot
Variable boot" not set, or is readonly.
switch: unset manual_boot
Variable manual_boot" not set, or is readonly.
switch:
Regards,
