2960-X

[Docklands]

Can you assign an IP address to an SVI on the 2960-X.

If not, can it be configured with a management address?

Thanks

[Bilal Nawaz]

Yes you can assign IP to SVI on 2960x

You can also configure management port

[Docklands]

Thank you for the reply.

Out of interest where can you find information on the other features available on the 2960X?

I tried the Cisco Navigator but it doesn't seem to work.

The IOS we are looking at is the LAN Base 15.2.2E5 MD

[Reza Sharifi]

What spesific feature are you looking for?

Here is a link to the data sheet and supported features:

http://www.cisco.com/c/en/us/products/collateral/switches/catalyst-2960-x-series-switches/data_sheet_c78-728232.html

HTH

[Docklands]

We need to know what features/commands are available with LAN Base 15.2.2E5 MD.

The Cisco Navigator site does not provide any information for this IOS when used with the 2960X

[Bilal Nawaz]

I hope this will help you

http://www.cisco.com/c/en/us/support/switches/catalyst-2960-x-series-switches/products-installation-and-configuration-guides-list.html

[Docklands]

Thank you Bilal.

I think until the Cisco Navigator is working properly this is the best information available.