cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements


68
Views
5
Helpful
7
Replies
Highlighted
Beginner

2960-XR Series Switches

I need to order 2960s, but a bit confused.  Silly question, but with the 2960XR-24PS, 2960XR-24TD, 2960XR-24TS.  What does PS, TD, and TS stand for?

 

And for 2960XR-48FPD, FPS, LPD, LPS?  FPD - full power distibution? LPD - Low Power Distribution?

2 ACCEPTED SOLUTIONS

Accepted Solutions
Beginner

Re: 2960-XR Series Switches

P - PoE

FP - Full PoE, all 48 ports

the end letter D or S is for uplinks -

D - 2 SFP+ ports

S - 4 SFP ports

it only comes with the IP Lite layer 3 license

regards, mk

please rate if helpful :)

Beginner

Re: 2960-XR Series Switches

these seem to be the options:

Cisco Catalyst 2960XR-48FPD-I      48 port full poe with 2 sfp+ ports
Cisco Catalyst 2960XR-48FPS-I       48 port full poe with 4 sfp ports
Cisco Catalyst 2960XR-24PD-I         24 port full poe with 2 sfp+ ports
Cisco Catalyst 2960XR-24PS-I        24 port full poe with 4 sfp ports

i think the sfp+ ports support both 1Gb & 10Gb links but please confirm before purchase

source:

https://www.cisco.com/c/en/us/products/collateral/switches/catalyst-2960-x-series-switches/datasheet_c78-728232.html#Ordering-Information

regards, mk

7 REPLIES
Beginner

Re: 2960-XR Series Switches

P - PoE

FP - Full PoE, all 48 ports

the end letter D or S is for uplinks -

D - 2 SFP+ ports

S - 4 SFP ports

it only comes with the IP Lite layer 3 license

regards, mk

please rate if helpful :)

Beginner

Re: 2960-XR Series Switches

So if I want to use 2960XR as my access layer switches, provide POE+ ports, and with option of 1 & 10 gig uplinks, which models would you recommend (a 24 port and a 48 port)?  

Beginner

Re: 2960-XR Series Switches

these seem to be the options:

Cisco Catalyst 2960XR-48FPD-I      48 port full poe with 2 sfp+ ports
Cisco Catalyst 2960XR-48FPS-I       48 port full poe with 4 sfp ports
Cisco Catalyst 2960XR-24PD-I         24 port full poe with 2 sfp+ ports
Cisco Catalyst 2960XR-24PS-I        24 port full poe with 4 sfp ports

i think the sfp+ ports support both 1Gb & 10Gb links but please confirm before purchase

source:

https://www.cisco.com/c/en/us/products/collateral/switches/catalyst-2960-x-series-switches/datasheet_c78-728232.html#Ordering-Information

regards, mk

Beginner

Re: 2960-XR Series Switches

Thanks! Much appreciated.
Beginner

Re: 2960-XR Series Switches

Do the 2960XR's support 10 gig SFPs? It says they support SFP+, but can't find the SFP models for the 2960XR.


Beginner

Re: 2960-XR Series Switches

I think they have only either x4 SFP ports or x2 SFP+ ports - I think the SFP+ ports work with both 1Gb & 10Gb links

Regards, mk

Enthusiast

Re: 2960-XR Series Switches

fil in the switch model in the the tmg matrix and select 10G

 

Network Device Product ID Transceiver Product ID Data Rate Form Factor Reach Cable Type Media Connector Type Transceiver Type Case Temp DOM HW Capable Minimum DOM SW
WS-C2960XR-24TD-I SFP-10G-SR 10 Gbps SFP+ 300m (OM3) Duplex Fiber MMF LC Optic 0 to 70C Y IOS 15.0(2)EX1 IOS 15.0(2)EX1
SFP-10G-SR 10 Gbps SFP+ 400m (OM4) Duplex Fiber MMF LC Optic 0 to 70C Y IOS 15.0(2)EX1 IOS 15.0(2)EX1
CreatePlease to create content
Content for Community-Ad

Ask the Expert- Endpoint Security