Hi All,
Trying to verfy CEF on the above specific platform, using "show int stats" (as per below excerpt):
Vlan200
Switching path Pkts In Chars In Pkts Out Chars Out
Processor 862191 74833000 821908 201680252
Route cache 1115 331791 0 0
Total 863306 75164791 821908 201680252
Interface FastEthernet0 is disabled
GigabitEthernet1/0/1
Switching path Pkts In Chars In Pkts Out Chars Out
Processor 0 0 285623 25173566
Route cache 0 0 0 0
Total 0 0 285623 25173566
As I understand it this platform implements Centralised CEF. As it seems there isn't a way to verfiy this on the physical interfaces (as per above), ie: Route Cache packets only display under the SVI's and nothing under the physicals, does this mean that CEF is not enabled under physicals ??
Also using "show ip int" backs this up also, int that CEF does not seem to be verifiable under the physical ??
GigabitEthernet1/0/1 is up, line protocol is up
Inbound access list is not set
m-esc-vic-melbourne-sw01#sh ip int vlan 200
Vlan200 is up, line protocol is up
IP CEF switching is enabled
IP route-cache flags are Fast, CEF
TAC have requested that we use "show platform" variants but I cannot see an explicit CEF enabled or other.
eg:
sh platform ip unicast cef-idb
m-esc-vic-melbourne-sw01#sh platform ip unicast cef-idb
==============================================================
Int SIf# Vl Flg IPE FRt HRt HwidbEn Fec HIf# Turbo
==============================================================
Vl1 741 1 26000 0 11 11 60C990 0 741 0x19643F8
Gi1/0/1 1 200 26000 0 11 11 60C990 0 1 0x19643F8
Does anyone have a clear understanding as to how to read this output ?
Thanks in advance.
