08-11-2011 12:06 PM - edited 03-07-2019 01:39 AM
Hi
im looking to purchase a couple of
WS-C2960S-48LPS-L
or
WS-C2960S-24TS-L
and stack them using
WS-C2960S-STACK
do they come with stacking cables? or will they have to be purchased separately?
im used to 3750's that come with the stacking cables.
Thankyou
08-11-2011 12:18 PM
When you purchase that stack module you get a 0.5M (50cm) stack cable with it.
Hope it helps.
08-11-2011 12:21 PM
thank you very much Collin
08-11-2011 07:30 PM
Hi Morris,
The below mentioned are the part-code of the stack cables. By default when you purchase a switch you will get 0.5M stack cable.
If you want a longer stack cable, then you should order for it by using the part id mentioned below.
The maximum length would be 3 metres.
Cisco Catalyst 2960-S FlexStack stacking cables:
=======================================
1. CAB-STK-E-0.5M FlexStack stacking cable with a 0.5 m length
2. CAB-STK-E-1M FlexStack stacking cable with a 1.0 m length
3. CAB-STK-E-3M FlexStack stacking cable with a 3.0 m length
Hope this helps
Cheers
Somu
Rate helpful posts
03-10-2018 12:27 AM
Thanks Collin, helpful info
03-10-2018 12:36 AM
If you are going to stack like 4+ you will need to order the longer stack cables separately, cause .5 meter aint gonna stack much
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: