cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

349
Views
0
Helpful
2
Replies
Highlighted
Beginner

2960X - Stack Member Removed Syslog ony - no snmp trap sent

Dear All,

our 2960X Switches (15.2(2)E9) only send syslogs in case a stack member gets lost but no SNMP traps as a deep dive into the tcpdump flows has revealed.

Is there a way to change this behavior and to make sure Catalyst 2960X and 2960S Switches will send SNMP traps for the event of a stack member getting lost (CEFC RFU REMOVED) ?

The Catalyst Switch is configured for sending this kind of SNMP traps to Cisco Prime but still will only send this information out as as syslog:

snmp-server enable traps fru-ctrl

snmp-server enable traps stackwise

 

snmp-server host <Cisco Prime Server IP> version 2c <community> mac-notification

 

Thanks for your help.

Everyone's tags (1)
2 REPLIES 2
Highlighted
VIP Mentor

Re: 2960X - Stack Member Removed Syslog ony - no snmp trap sent

You can try below one :

snmp-server enable traps stackwise member-removed

BB
*** Rate All Helpful Responses ***
Highlighted
Beginner

Re: 2960X - Stack Member Removed Syslog ony - no snmp trap sent

Hi

Thanks but does snmp-server enable traps stackwise  not include member-removed ? As far as I understand if I add "member-removed" I will only get alerts for member-removed and no other stackwise events.

 

Thanks.

T.

CreatePlease to create content
Content for Community-Ad