2960x Stack V02 in 2960XR IPLITE

[lnacional]

Hi everyone.

My question is:

Can i use a C2960x-STACK V02 module on 2960XR switch IPLITE?

Thanks.

[Flavio Miranda]

Hi

 Not supported:

"

Switch Stack Overview

A switch stack is a set of up to eight stacking-capable switches connected through their stack ports. The Catalyst 2960-XR switch does not support mixed stacking. Stacking is supported only with other Catalyst 2960-XR switches."

[lnacional]

it will not be a mixed stack, its gona be two 2960xr IPLITE.

C2960x-stack-v02 is the module PID VID.

Regards

[lnacional]

I Install the module in a single 2960 XR IPLITE and did not detected.

[Flavio Miranda]

Looking on the datasheet. Cisco only mention FlexStack-Extended

https://www.cisco.com/c/en/us/products/collateral/switches/catalyst-2960-x-series-switches/datasheet_c78-728232.html