09-17-2019 07:10 AM
Hello,
2960X switches are now L3 starting from this release :15.2(6)E
routed physical ports , eigrp, ospf ....etc
Regards,
hamza.
09-17-2019 07:18 AM
Hi,
The 2960x series switches are mainly layer-2 with some limited layer-3 functionality pending the model and the license.
HTH
09-17-2019 07:27 AM
could you please check that and let us know
Regards,
Hamza
09-17-2019 07:47 AM - edited 09-17-2019 07:47 AM
I would not rely on just the output of "sh ip route" Try enabling these features and see if they actually work since you have a LAN Base switch.
HTH
09-17-2019 07:51 AM
09-17-2019 07:57 AM
I understand that but I would actually test it to verify the document is correct or not.
HTH
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide