01-19-2013 10:09 PM - edited 03-07-2019 11:11 AM
Dear All,
I have a Cisco switch 4510R+E with SUP7-E. Due to new requirement we are planning to add 3nos 12 port 10g- WS-X4712-SFP+E Catalyst 4500 E-Series 12-Port card on the switch.
I would like to know whether we can add 3 nos 12 port 10g- WS-X4712-SFP+E and it will work well.
Please let me know if any issues to add these cards on the switch.
Thanks
Solved! Go to Solution.
01-20-2013 05:08 AM
Disclaimer
The Author of this posting offers the information contained within this posting without consideration and with the reader's understanding that there's no implied or expressed suitability or fitness for any purpose. Information provided is for informational purposes only and should not be construed as rendering professional advice of any kind. Usage of this posting's information is solely at reader's own risk.
Liability Disclaimer
In no event shall Author be liable for any damages whatsoever (including, without limitation, damages for loss of use, data or profit) arising out of the use or inability to use the posting's information even if Author has been advised of the possibility of such damage.
Posting
From the spec sheets, it should work in your 4510R+E with sup7e if you have 3.1.0SG or later.
Spec sheets also note this card oversubscribes by 2.5:1 and ports are divided into 4 3-port groups. The bandwidth issues could impact does the ". . . it work well." depending on how hard you expect to drive the various ports.
01-20-2013 02:45 AM
Could someone please respond on this?
01-20-2013 05:08 AM
Disclaimer
The Author of this posting offers the information contained within this posting without consideration and with the reader's understanding that there's no implied or expressed suitability or fitness for any purpose. Information provided is for informational purposes only and should not be construed as rendering professional advice of any kind. Usage of this posting's information is solely at reader's own risk.
Liability Disclaimer
In no event shall Author be liable for any damages whatsoever (including, without limitation, damages for loss of use, data or profit) arising out of the use or inability to use the posting's information even if Author has been advised of the possibility of such damage.
Posting
From the spec sheets, it should work in your 4510R+E with sup7e if you have 3.1.0SG or later.
Spec sheets also note this card oversubscribes by 2.5:1 and ports are divided into 4 3-port groups. The bandwidth issues could impact does the ". . . it work well." depending on how hard you expect to drive the various ports.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide