cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1054
Views
5
Helpful
5
Replies

33.0.0.0/8 is variably subnetted ??

Peter So
Level 1
Level 1

擷取.PNG擷取1.PNG擷取2.PNG

 

Hello all. I am doing rip route (not version 2). Why 33.0.0.0/8 is variably subnetted (photo attached) ?????

I want to conf rip #network 33.20.5.0 and #network 33.20.4.0. But it finally show #33.0.0.0 in #sh run (photo attached). Why turn to 8 bits? How can I fix it ?? 

1 Accepted Solution

Accepted Solutions

Hello,

 

I don't see any networks announced under the RIP process. You need to add:

 

router rip

version 2

network 33.0.0.0

no auto-summary

 

to all your routers. But even then you won't the see routes in the routing table, because your static routes have a lower administrative distance and take precedence. Remove all static routes and just use RIP as described above.

View solution in original post

5 Replies 5

Hello,

 

are you running RIPv2 ?

 

router rip

--> version 2

 

?

 

Otherwise, post the zipped Packet Tracer project (.pkt) file here as an attachment...

Reply to Georg Pauwen

 

I am not use RIP v2. I have attached the zip file here. Thank you

Hello,

 

I don't see any networks announced under the RIP process. You need to add:

 

router rip

version 2

network 33.0.0.0

no auto-summary

 

to all your routers. But even then you won't the see routes in the routing table, because your static routes have a lower administrative distance and take precedence. Remove all static routes and just use RIP as described above.

Thank you!! I solved the problem.

Reply to Georg Pauwen

I am not use RIP v2. I have attached the zip file here. Thank you

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: