03-08-2009 10:02 AM - edited 03-06-2019 04:27 AM
Hi Guys
i have a 3560 running IOS 'c3560-ipservices-mz.122-25.SEB4.bin'
When i connect a cicso ip phone into the port it goes into err-disable. when i do a show power inline f0/19 it says inline power is not supported on this interface. This is the case for all interfaces...
The power available is showing as zero.. why is this?
I checked the feature navigator and it seems as though this hardware and IOS should support poe, anyone got any ideas??
Switch#sho power inline
Available:0.0(w) Used:0.0(w) Remaining:0.0(w)
Interface Admin Oper Power Device Class Max
(Watts)
--------- ------ ---------- ------- ------------------- ----- ----
Switch#
Switch#sho power inline f0/19
Interface Fa0/19: inline power not supported
Thanks
Solved! Go to Solution.
03-08-2009 10:20 AM
The 3560 does support POE but not every model.
What is the model of your 3560
Below is a link to the 3560's with and without POE support :-
hxxp://www.cisco.com/en/US/prod/collateral/switches/ps5718/ps5528/product_data_sheet09186a00801f3d7f.html
03-08-2009 10:20 AM
The 3560 does support POE but not every model.
What is the model of your 3560
Below is a link to the 3560's with and without POE support :-
hxxp://www.cisco.com/en/US/prod/collateral/switches/ps5718/ps5528/product_data_sheet09186a00801f3d7f.html
03-08-2009 10:47 AM
WS-C3560-24TS-E
Looking at the data sheet it does not support poe.
Thanks for clearing this up.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: