My client has recently upgraded his 3560 to version 12.2.(58)SE2. After the upgrade they are having "issue" with logging into enable mode directly. the command privilege level 15 is present on the vty line.
They are using ACS as the authentication server, However I do not believe the problem lies there (I may be wrong).
Any ideas why this might be happening? A bug perhaps?
-- Please remember to select a correct answer and rate helpful posts
Enhanced Interior Gateway Routing ProtocolEnhanced Interior Gateway Routing Protocol (EIGRP) is an interior gateway protocol suited for many diffrent topologies and media. In a well designed network, EIGRP scales well and provides extremely quick converge...
Hello We have 2 data centers with Direct Connects to AWS running BGP. The US DC advertises it's private /19 range and the CA DC advertises a /12, the problem is that the /19 falls within the range of the /12. Is there a way to prevent the CA DC from ...
Hi Guys, I have two questions about EIGRP behavior when we have Multiple EIGRP routes: 1- I tried to show on some router the acquired EIGRP paths for a route X.X.X.X by typing the command : "show ip eigrp topology X.X.X.X". On the output there w...
[ The Discussion forum will be published on December 1st ]
Take the opportunity to reach out to our expert and discuss best practices regarding on how to troubleshoot a live network and identify the root cause easily. Learn more about Serviceability and h...
To provide a solution to quickly setup a router at a remote location that supports WiFi and provides instant internet access using LTE as a transport while deploying with Cisco SD-WAN.
Plug the router to a power sou...