cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
109
Views
0
Helpful
5
Replies
Highlighted
Beginner

3650 booting up on switch: mode

Got 2 x WS-C3650-24TS from the service provider, when I boot up it comes up with, 1 one of them works fine the other one comes up with below, can you please advise how to install 

IOS I want to install "03.06.08E" "cat3k_caa-universalk9"

 

switch:

 

dir flash:
Directory of flash:/

61953 drwx 4096 .
2 drwx 4096 ..
61954 -rw- 2097152 nvram_config
61974 -rw- 43109956 cat3k_caa-iosd-universalk9.SPA.152-2.E8.pkg
61978 -rw- 1237 cat3k_caa-universalk9.SPA.03.06.08.E.152-2.E8.conf

1317650432 bytes available (330244096 bytes used)

 

5 REPLIES 5
VIP Expert

Re: 3650 booting up on switch: mode

Beginner

Re: 3650 booting up on switch: mode

It didn't work for me, getting below error after doing the boot command:

 

switch: boot flash: cat3k_caa-universalk9.SPA.03.06.08.E.152-2.E8.conf
loading flash:
Reading full image into memory....done
LE hdr->offset=0x800f6478
BE hdr->offset=0x800f6478
MAGIC: 0x322e5350
kernel_image[0]=
kernel_image[1]=ernel_image[2]=
kernel_image[3]=
package_len=4096, offset=738205953, iso_size=-738201857
Image validated
octeon_loadlinux: bad ELF image
Error loading kernel image
usage: boot [<filename>] [<cmdline>]

Engager

Re: 3650 booting up on switch: mode

Hi @batishm ,

 

On the switch that works fine, run the show flash: command.
If in his flash has an .bin file, you can copy that file to the flash of the switch that starts in switch:

 

You can copy the .bin file to a TFTP server.
Then, copy that file from the TFTP to the other switch.

 

Regards

Beginner

Re: 3650 booting up on switch: mode

There is no .bin file on the other switch, see the output of the command below:



Switch#sh flash

-#- --length-- ---------date/time--------- path

2 2097152 Aug 13 2019 23:56:57.0000000000 +00:00 nvram_config

3 4096 Aug 13 2019 23:56:03.0000000000 +00:00 dc_profile_dir

4 199306 Aug 13 2019 23:56:03.0000000000 +00:00 dc_profile_dir/dc_default_profiles.txt

5 199306 Aug 13 2019 23:56:03.0000000000 +00:00 dc_profile_dir/dc_default_profiles.txt.bkp

6 35 Aug 14 2019 00:39:34.0000000000 +00:00 pnp-tech-time

7 39786 Aug 14 2019 00:39:36.0000000000 +00:00 pnp-tech-discovery-summary

8 1237 Sep 19 2018 01:24:23.0000000000 +00:00 packages.conf

9 83298720 Sep 19 2018 01:23:27.0000000000 +00:00 cat3k_caa-base.SPA.03.06.08E.pkg

10 3949504 Sep 19 2018 01:23:23.0000000000 +00:00 cat3k_caa-drivers.SPA.03.06.08E.pkg

11 33811696 Sep 19 2018 01:23:24.0000000000 +00:00 cat3k_caa-infra.SPA.03.06.08E.pkg

12 43109956 Sep 19 2018 01:23:24.0000000000 +00:00 cat3k_caa-iosd-universalk9.SPA.152-2.E8.pkg

13 28447888 Sep 19 2018 01:23:24.0000000000 +00:00 cat3k_caa-platform.SPA.03.06.08E.pkg

14 1237 Sep 19 2018 01:23:54.0000000000 +00:00 cat3k_caa-universalk9.SPA.03.06.08.E.152-2.E8.conf

15 112669764 Sep 19 2018 01:23:23.0000000000 +00:00 cat3k_caa-wcm.SPA.10.2.180.0.pkg

1228742656 bytes available (310833152 bytes used)



Switch#show boot

---------------------------

Switch 1

---------------------------

Current Boot Variables:

BOOT variable does not exist



Boot Variables on next reload:

BOOT variable = flash:packages.conf

Allow Dev Key = yes

Manual Boot = no

Enable Break = no


VIP Expert

Re: 3650 booting up on switch: mode

Can you try loading this and test?

cat3k_caa-iosd-universalk9.SPA.152-2.E8.pkg

CreatePlease to create content
Content for Community-Ad
July's Community Spotlight Awards