3650 Enhanced Object Tracking

[aweise]

I use enhanced object tracking with EEM scripts in various locations throughout my network. However, when I went to apply this to a 3650 switch, it will not let the event manager applet act upon a tracked event. For example, here is the config I was working with:

ip sla 1
 icmp-echo 10.1.1.1 source-interface Vlan100

ip sla schedule 1 life forever start-time now

track 1 ip sla 1 reachability
delay down 10 up 5

event manager applet ROUTER_DOWN
 event track 1 state down

 action 1...

 action 2...

The "even track 1 state down" command is not available under the event manager applet. Is this a limitation on the 3650 or the IOS I'm running (16.12.5b)? Can I somehow track the status of the interface instead? The IP address is local to the switch.

[balaji.bandi]

Looks for me Limitation here.

is there any other device working on the environment with OLD IOS ?

some guide lines :

https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/ipapp/configuration/xe-3se/3650/iap-xe-3se-3650-book/iap-ets.html#GUID-A294B6B0-7E5A-4579-BED1-68DFBC8886D8

[aweise]

I have this running on a few routers and a couple of Nexus 7706 switches, but this is the first time on a 3650 switch. 

I would open a TAC case, but the last time I did so regarding an EEM script, I was told TAC didn't support them.

[balaji.bandi]

at least they can give you direction is this works on this platform or not.