cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
432
Views
0
Helpful
1
Replies

3650 MAC ACL Problem

egemen1981
Level 1
Level 1

Dear All,

 

We installed cat3k_caa-universalk9.SPA.03.03.00.SE.150-1.EZ.bin IOS version in our 3650-24TDS.

 

We configured MAC ACL on each port, We are trying to add 1000+ permit lines for extended MAC ACL, when we are add more than 600 or 650 permit lines we are getting error below.

 

“Aug  7 05:48:37.732: %ACL_ERRMSG-4-UNLOADED: 1 fed:  Input MAC Port ACL on interface Gi1/0/1 for label 4 on asic0 could not be programmed in hardware and traffic will be dropped.”

 

Kindly requesting help!

1 Reply 1

Rajeev Sharma
Cisco Employee
Cisco Employee

Hey,

Check the TCAM utilization and sdm template you are using on the box. Share the following outputs:

#show plat tcam utilization

#show sdm prefer

HTH.

Regards,

RS.

Review Cisco Networking for a $25 gift card