3650 password recovery enabled procedures

[ปลาวาฬทราย RMUTT CPE IX]

I can't recovery the password, this is my step:

switch: flash_init
switch: load_helper

Unknown cmd:
switch: rename flash:config.text flash:config.old

rename: read only file system

switch: set

ABNORMAL_RESET_COUNT=0
ASIC_PCI_RESET=1
BOOT=flash:packages.conf
BOOT_LOADER_UPGRADE_DISABLE=1
BSI=0
BYPASS_STARTUP_CONFIG== 1
BYPASS_START_CONFIG== 0
BY_PASS_STARTUP_CONFIG== 1
CFG_MODEL_NUM=WS-C3650-48TD-S
CLEI_CODE_NUMBER=IPMV410BRE
CSR_PCIERST_DISCONNECTED=yes
DC_COPY=yes
D_STACK_DOMAIN_NUM=1
ECI_CODE_NUMBER=469507
MAC_ADDR=70:DF:2F:EF:AD:00
MANUAL_BOOT=no
MODEL_NUM=WS-C3650-48TD
MODEL_REVISION_NUM=P0
MOTHERBOARD_ASSEMBLY_NUM=73-15896-05
MOTHERBOARD_REVISION_NUM=A0
MOTHERBOARD_SERIAL_NUM=FDO21181VNW
RANDOM_NUM=911359988
RECOVERY_BUNDLE=sda9:cat3k_caa-recovery.bin
RET_2_RTS=11:02:51 TH Mon Jan 25 2021
SWITCH_IGNORE_STARTUP_CFG== 1
SWITCH_NUMBER=1
SYSTEM_SERIAL_NUM=FDO2120Q1N6
TAN_NUM=800-41239-03
TAN_REVISION_NUMBER=B0
TEMPLATE=advanced
TERMLINES=0
VERSION_ID=V04

How should I do?

Thank you very much.

[Leo Laohoo]

Procedure with Password Recovery Enabled

[ปลาวาฬทราย RMUTT CPE IX · Accepted solution]

It worked by:

1. boot to rommon
2. switch: set BYPASS_STARTUP_CONFIG== 1
3. switch: boot
4. push reset button on sw
5. unplug power cable an boot to rommon again
6. switch: set BYPASS_STARTUP_CONFIG== 0
7. switch: boot

Thank you very much.