04-06-2014 06:43 AM - edited 03-07-2019 07:00 PM
Hello,
I'm hoping my issues will be an easy find, but maybe the late night working has made my skip over it.
Anyway, I have a 3750-24PS switch as the newest edition to my existing network (unfortunately hp, not cisco). I have it configured to trunk/link to the procurve core switch and I can bounce between Fa ports set for various vlans and pull and address no problem. What I can't do is ping the 3750 either connecting through the switch or from connecting via the hp side. I can ping and connect to the procurve switches, and also from the hp console, a ping can get through the 3750.
Just can't put my finger on what may be missing that doesn't allow my to ping/connect to the 3750. Can't exactly deploy this since I can't contact it!
Thanks
Solved! Go to Solution.
04-06-2014 07:27 AM
Which switch is doing the routing for vlans ?
If is the HP switch that you posted some configuration from then add this to your 3750 configuration -
"ip default-gateway 10.10.4.59"
the above assumes your 3750 is only acting as a L2 switch and not L3.
Jon
04-06-2014 07:27 AM
Which switch is doing the routing for vlans ?
If is the HP switch that you posted some configuration from then add this to your 3750 configuration -
"ip default-gateway 10.10.4.59"
the above assumes your 3750 is only acting as a L2 switch and not L3.
Jon
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide