cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
399
Views
0
Helpful
4
Replies
Highlighted
Beginner

3750 portfast

When I set up portfast to physical and logical ports, I want to know if it works the same way and what the differences are.

 

thank you.

1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted

For Portchannels, you apply the command to the Portchannel interface only and the individual physical interfaces will inherent the config from the Portchannel. 

 

HTH

View solution in original post

4 REPLIES 4
Highlighted
Hall of Fame Expert

Usually portfast applies to physical ports facing end devices like PCs, Laptops, printers, etc..

Not sure what you mean by logical? If it is on Portchannles, it works the same way and has the same effect. 

HTH

Highlighted

thank you,

 

If so, do you need to configure portfast on both int port channel1 and the physical ports it contains?

Highlighted

For Portchannels, you apply the command to the Portchannel interface only and the individual physical interfaces will inherent the config from the Portchannel. 

 

HTH

View solution in original post

Highlighted

Are there related Cisco documents?

Content for Community-Ad