cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1104
Views
0
Helpful
4
Replies

3750 portfast

JunghunLim7806
Beginner
Beginner

When I set up portfast to physical and logical ports, I want to know if it works the same way and what the differences are.

 

thank you.

1 Accepted Solution

Accepted Solutions

For Portchannels, you apply the command to the Portchannel interface only and the individual physical interfaces will inherent the config from the Portchannel. 

 

HTH

View solution in original post

4 Replies 4

Reza Sharifi
Hall of Fame
Hall of Fame

Usually portfast applies to physical ports facing end devices like PCs, Laptops, printers, etc..

Not sure what you mean by logical? If it is on Portchannles, it works the same way and has the same effect. 

HTH

thank you,

 

If so, do you need to configure portfast on both int port channel1 and the physical ports it contains?

For Portchannels, you apply the command to the Portchannel interface only and the individual physical interfaces will inherent the config from the Portchannel. 

 

HTH

Are there related Cisco documents?

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: