cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

Community Helping Community

1163
Views
0
Helpful
8
Replies
Beginner

3750 switch SNMP semlocked

Hi,

I am having a lab switch. Recently I am getting

"%SCHED-3-SEMLOCKED: SNMP ENGINE attempted to lock a semaphore, already locked by itself" message and the switch has started to hang a little bit. I just want to know what this log means and how to trouble shoot.

I'm using C3750, version 12.2(25)SEE3

Thanks,

Sri

Everyone's tags (2)
2 ACCEPTED SOLUTIONS

Accepted Solutions
VIP Mentor

3750 switch SNMP semlocked

Hi,

The traceback may vary.

Conditions: This symptom is observed if the snmp engine is shut down during the processing of an snmpset. Entering the command no snmp-server in config mode is one way that the snmp engine can be shut down. The likely hood of the snmp engine being shut down during the processing of an snmpset is very small.

Workaround: There is no workaround other than to reboot the device.

Regards

Please rate if it helps.

View solution in original post

Cisco Employee

3750 switch SNMP semlocked

Hi Srikant,

It's an IOS defect (most likely CSCse97398) that is why the device is displaying this behavor. A reload is a workaround, but the issue may return. To resolve this issue you must upgrade to 12.2(35)SE or greater which contains the fix for the above defect.

HTH

Anthony

View solution in original post

8 REPLIES 8
VIP Mentor

3750 switch SNMP semlocked

Hi Srikanth,

Just reboot the device will solve this problem.

and this is the only way.

REgards

Please rate if it helps.

Beginner

3750 switch SNMP semlocked

Thanks Sandeep. Also can you explain what does this syslog means:

%SCHED-3-SEMLOCKED: SNMP ENGINE attempted to lock a semaphore, already locked by itself

and why the device started generating this syslog?

VIP Mentor

3750 switch SNMP semlocked

Hi,

The traceback may vary.

Conditions: This symptom is observed if the snmp engine is shut down during the processing of an snmpset. Entering the command no snmp-server in config mode is one way that the snmp engine can be shut down. The likely hood of the snmp engine being shut down during the processing of an snmpset is very small.

Workaround: There is no workaround other than to reboot the device.

Regards

Please rate if it helps.

View solution in original post

Cisco Employee

3750 switch SNMP semlocked

Hi Srikant,

It's an IOS defect (most likely CSCse97398) that is why the device is displaying this behavor. A reload is a workaround, but the issue may return. To resolve this issue you must upgrade to 12.2(35)SE or greater which contains the fix for the above defect.

HTH

Anthony

View solution in original post

Beginner

3750 switch SNMP semlocked

Thanks Sandeep and answanso its really helpful.

I tried to look more into this issue and I have found another bug related to this : CSCti85075

could this be associated to my ios?

and can you explain traceback in detail. I know a very little about it. It would be great help if you guys can explain it in detail. 

Highlighted
Cisco Employee

3750 switch SNMP semlocked

Hi Srikant,

CSCti85075 isn't fixed for your train of IOS.

Thanks

Anthony

VIP Mentor

3750 switch SNMP semlocked

HI Srikant,

Have you tried to reboot the device??

Regards

Beginner

3750 switch SNMP semlocked

Yes rebooting the device solves the issue. Thanks Sandeep, Anthony

CreatePlease to create content
Content for Community-Ad