I have a customer and he want to implement VPLEX and we need to extend L2 to the other location, and i need an advice about the next diagram.
The customer only have 2 server running ESXi and 80 VM total. i choose 3850-12XS for cheep and i don't need a lot of port
3850-12XS-S with SFP-10G-ER to interconnect the DARK FIBER to extend L2 and SFP-10G-SR to interconnect Core. Switch above the core are L3, what do you think about that design and i would like advice about extend L2 with 3850 series.
So basically you are extending the vlan(s) from one location to another. It should work fine as long as the switches are connected to each other using only one link. This way you shouldn't have to worry about spanning tree.
Hi,I've had below topology: So from RT1's perspective, if link RT1 - RT5 is the link to be protected, the P-space (RT1, Redlink) will be RT2? I can see the definition of P space of RT1 is the set of nodes that RT1 can reach as per pre-convergenc...
Cisco Champion Radio · S7|E30 Taming Your AI/ ML Workloads with Kubeflow
As organizations increasingly introduce machine learning (ML) capabilities to their existing products, their artificial intelligence (AI) projects and operations complexity g...
Cisco IOS-XE 17.3.1 – Catalyst Switching Updates
Table of Contents
Hardware Additions since IOS-XE 17.2.1
Key Summary Features
Platform and Infra Features
High Availability Features
Routing / MPLS / VPN Features