cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
2292
Views
0
Helpful
2
Replies
Highlighted

3850/3750 QinQ

Hi guys,

The customer have a 3850 and a 3750 with QinQ configured. We have a problem with QinQ traffic that is in 3750 and your gateway is the 3850. All traffic pass through 3850 but QinQ traffic don't work. The catalyst 3850 is running 3.2.3 IOS XE. 

2 REPLIES 2
Highlighted
VIP Mentor

Hello

sh l2protocol-tunnel interface gig1/0/7
sh system mtu

res

Paul



kind regards
Paul

Please rate and mark posts accordingly if you have found any of the information provided useful.
It will hopefully assist others with similar issues in the future
Highlighted
Cisco Employee

Hi Luis,

There's no much information in this post however there's a known bug in Cat3850 that might be causing this issue:

CSCuo84770 - 3850/3.3.2SE/Not forwarding double dot1Q tagged packets

Is there any chance for you to upgrade the code? You can also try a "ip device tracking maximum 0" int he interfaces connected to the Cat3750.

Regards.

- Omar

Content for Community-Ad