12-19-2019 08:52 PM
Hi guys,
I tried to upgrade a 3850 switch from the 3.2.3 to 16.9.4 in the install mode. After the upgrade, the switch does not come up. It is cycling through these messages constantly...
BOOT=flash:packages.conf CFG_MODEL_NUM=WS-C3850-48PW-SZ CLEI_CODE_NUMBER=IPMW700ARB ECI_CODE_NUMBER=466864 LINUX_COREMASK=15 MAC_ADDR=E0:89:9D:25:F1:80 MANUAL_BOOT=no MODEL_NUM=WS-C3850-48P MODEL_REVISION_NUM=R0 MOTHERBOARD_ASSEMBLY_NUM=73-14442-10 MOTHERBOARD_REVISION_NUM=A0 MOTHERBOARD_SERIAL_NUM=FOC18452NVE POE1_ASSEMBLY_NUM=73-14095-01 POE1_REVISION_NUM=B0 POE1_SERIAL_NUM=FOC1845403L POE2_ASSEMBLY_NUM=73-14095-01 POE2_REVISION_NUM=B0 POE2_SERIAL_NUM=FOC18452FQD RECOVERY_BUNDLE=sda9:cat3k_caa-recovery.bin STKPWR_ASSEMBLY_NUM=73-11956-08 STKPWR_REVISION_NUM=B0 STKPWR_SERIAL_NUM=FOC184500TW SYSTEM_SERIAL_NUM=FCW1845C1SB TAN_NUM=800-37564-03 TAN_REVISION_NUMBER=A0 TERMLINES=0 USB_ASSEMBLY_NUM=73-12923-05 USB_REVISION_NUM=C0 USB_SERIAL_NUM=FOC18451JHY VERSION_ID=V04 TEMPLATE=advanced BSI=0 CALL_HOME_DEBUG=00000 DIAG_DEBUG=000000000000 ABNORMAL_RESET_COUNT=0 SWITCH_PRIORITY=14 RET_2_RTS=23:00:14 UTC Mon Oct 7 2019 SWITCH_NUMBER=2 RANDOM_NUM=1157071131 ▒▒▒▒▒▒▒0▒▒▒▒▒▒▒▒,▒▒▒▒<many many more of these>▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒BAUD=9600 BOOT=flash:packages.conf CFG_MODEL_NUM=WS-C3850-48PW-SZ CLEI_CODE_NUMBER=IPMW700ARB ECI_CODE_NUMBER=466864 LINUX_COREMASK=15 MAC_ADDR=E0:89:9D:25:F1:80 MANUAL_BOOT=no MODEL_NUM=WS-C3850-48P MODEL_REVISION_NUM=R0 MOTHERBOARD_ASSEMBLY_NUM=73-14442-10 MOTHERBOARD_REVISION_NUM=A0 MOTHERBOARD_SERIAL_NUM=FOC18452NVE POE1_ASSEMBLY_NUM=73-14095-01 POE1_REVISION_NUM=B0 POE1_SERIAL_NUM=FOC1845403L POE2_ASSEMBLY_NUM=73-14095-01 POE2_REVISION_NUM=B0 POE2_SERIAL_NUM=FOC18452FQD RECOVERY_BUNDLE=sda9:cat3k_caa-recovery.bin STKPWR_ASSEMBLY_NUM=73-11956-08 STKPWR_REVISION_NUM=B0 STKPWR_SERIAL_NUM=FOC184500TW SYSTEM_SERIAL_NUM=FCW1845C1SB TAN_NUM=800-37564-03 TAN_REVISION_NUMBER=A0 TERMLINES=0 USB_ASSEMBLY_NUM=73-12923-05 USB_REVISION_NUM=C0 USB_SERIAL_NUM=FOC18451JHY VERSION_ID=V04 TEMPLATE=advanced BSI=0 CALL_HOME_DEBUG=00000 DIAG_DEBUG=000000000000 ABNORMAL_RESET_COUNT=0 SWITCH_PRIORITY=14 RET_2_RTS=23:00:14 UTC Mon Oct 7 2019 SWITCH_NUMBER=2 RANDOM_NUM=1157071131
I have tried with reboot. I have tried with pressing mode button while plugging in the power and continue to hold. These message just kept on repeating. I never get the "switch:" prompt. Any idea why? Thanks!
12-19-2019 10:16 PM
12-30-2019 11:28 AM
Sorry for the late response... The email notification for your response was blocked by our email spam filter... I can't get in the ROMMON. The message just kept on repeating without allowing me to enter the mode
12-30-2019 02:02 PM
12-19-2019 10:22 PM
Have you tried holding the "Mode" button for 10secs? If yes & no use, then advise to raise a TAC case as this seems to be a bug or any hw failure.
12-30-2019 11:31 AM
Sorry for the late response... The email notification for your response was blocked by our email spam filter... I will receive the switches in the new year and try it myself. The switches were at a remote office. As per my onsite personnel, he did press it for more than 30 seconds. I will report back. Thank you.
10-20-2023 10:51 AM
Not to drag up an old post, but what is the difference between the Z version listed here and the regular WS-C3850-48PW-S? I can't find any real references to WS-C3850-48PW-SZ but it does seem valid
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: