I could not apply service-policy input on an interface of 3850 lanbase but can apply service-policy output on an interface. Have no error but no show on configuration ? Software version 03.02.02.SE. Is this the way it should be, no service-policy input ?
Thanks for any input
With AutoQos then it appear
interface GigabitEthernet1/0/19
description Connection to hq-3945-r g0/0
switchport access vlan 301
shutdown
trust device cisco-phone
auto qos voip cisco-phone
spanning-tree portfast
service-policy input AutoQos-4.0-CiscoPhone-Input-Policy
service-policy output AutoQos-4.0-Output-Policy
With another policy, it won't allow on input
Found it, I use the policy-map as Input-Policy, change it to something else as KH-Input-Policy and it works.
