12-22-2016 06:05 AM - edited 03-08-2019 08:40 AM
I'm having an issue with several switches that were previously deployed with 2 power supplies per switch. I have since re-purposed these switches and I'm only running them with 1 power supply but the switch keeps displaying the amber light and throwing out errors in the logs that the PSU is not responding.
The switches have been re-provisioned, config wiped, rebooted multiple times, code upgraded to 3.6.5.
-I have tried shutting down the power slot 1B and still get the error
This is what it reads:
-- ------------------ ---------- --------------- ------- ------- -----
1A PWR-C1-1100WAC DTN2027V0L2 OK Good Good 1100
1B Not Present
error:
%PLATFORM_STACKPOWER-4-REDUNDANCY_LOSS: Switch 1's power stack lost redundancy and is now operating in power sharing mode
I can't seem to find anything out there on how to resolve this issue; I'm hoping you guys can help! :)
01-18-2017 05:03 AM
Hi,
Did you try : stack-power switch 1 port 2 disable ?
HTH
01-10-2018 04:09 PM
Nope that doesn't work either. I have this issue on 3.7.5 as well but have yet to find a resolution.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide