cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1611
Views
5
Helpful
6
Replies

3850 stack high cpu usage

networksam
Level 1
Level 1

Dear All

I have a problem

my 3850 stack with 2 switch

when i show processes cpu history,and  show processes cpu sorted and show processes cpu platform sorted 5sec , I get this  i get this

擷取1.PNG擷取2.PNG擷取3.PNG

 

now , my question is why when I show processes cpu history, it will show cpu up to 90%?

and why my the utilization caused by interrupts from the data plane is so high ?

I don't know it is normal or not, can anyone help me, thank you!

 

 

 

1 Accepted Solution

Accepted Solutions


@networksam wrote:
 20748     344     44800     132      6260     44800    346440         cli_agent  

Raise a TAC Case.  I suspect this could be CSCvh51167.

View solution in original post

6 Replies 6

marce1000
VIP
VIP

 

 - FYI  : https://www.cisco.com/c/en/us/support/docs/switches/catalyst-3850-series-switches/117594-technote-hicpu3850-00.html

 M.



-- ' 'Good body every evening' ' this sentence was once spotted on a logo at the entrance of a Weight Watchers Club !

Leo Laohoo
Hall of Fame
Hall of Fame

Post the complete output to the following commands: 

  1. sh version
  2. sh switch details
  3. sh platform software status con brief

Hi Leo

thank U, it's information about commands

I am looking forward to your reply

 

 


@networksam wrote:
CAT3K_CAA-UNIVERSALK9 BUNDLE 

NOTE:  Stack in Bundle Mode.  Kindly refer to Cisco 3850:  IOS-XE/Firmware Upgrade (Install Mode).

The memory utilization for switch 2 is abnormally high (ideally <50%).  

Please provide the output to the command "sh processor memory platform sorted location switch 2 r0".

Hi Leo

thank U, it's information about commands

 

I study others question the answer by you.

my question maybe is a memory leak?

I can't change the stack mode now, because the 3850stack is the core switch & my company active all day.

but when I find the correct issue, I will try to tell my boss it have change stack mode to fix the problem.

 

when I show processes cpu platform sorted location switch 1 r0 

I find a high cpu process

Pid PPid 5Sec 1Min 5Min Status Size Name

18174 17892 0% 11% 2% S 240742400 smand

Can you tell me what is the process smand ?

I try to find what is the process smand on internet, but I can't find useful information

 

Thanks you a lot again

 


@networksam wrote:
 20748     344     44800     132      6260     44800    346440         cli_agent  

Raise a TAC Case.  I suspect this could be CSCvh51167.

Review Cisco Networking products for a $25 gift card