cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
8132
Views
0
Helpful
11
Replies

3850 - Web GUI Stuck in Express Setup

richard-marlow
Level 1
Level 1

I have configured my new 3850 using the command line and all works well.

I logged into the web interface expecting to see device manager with a pretty image of the switch etc.

However I am presented with the Express Setup page and even if i fill in all of the details again and click submit then nothing happens and this is all I can get.

I have version 03.02.01SE software.

Any Ideas?

Thanks

2 Accepted Solutions

Accepted Solutions

I have tested it in my lab again. I have the same issue, but I think it is quite normal, because there is no completly GUI available right now. There is also no GUI for configuring WiFi it will be released in the next month - in the meantime you have to use the CLI...

cheers

./chris

View solution in original post

mgas
Cisco Employee
Cisco Employee

Here is confirmation that GUI is not yet supported on 3850 and will be added later on as IOS update:

http://www.cisco.com/en/US/prod/collateral/switches/ps5718/ps12686/qa_c67-722110.html

Cheers

View solution in original post

11 Replies 11

Reza Sharifi
Hall of Fame
Hall of Fame

try adding these command using the cli and test again:

ip http server

ip http secure-server

HTH

I only ever use https so have the following

no ip http server

ip http secure-server

This config is proven on the 3750X switch stacks we have.

IMHO there is no webgui available right now. The wegbui is coming in the next release...

Screenshot attached

SHIBI V DEV
Level 1
Level 1

Have you confirmed the User account which you are logging in to switch using GUI is having full priv. Try creating anothe user with full privilege

The user is configured with privilege level 15 as follows

username admin privilege 15 password XXXXXXXX

Thanks

I have tested it in my lab again. I have the same issue, but I think it is quite normal, because there is no completly GUI available right now. There is also no GUI for configuring WiFi it will be released in the next month - in the meantime you have to use the CLI...

cheers

./chris

OK then Cheers Chris

After re-reading the product overview the is indead mention of the lack of web GUI

Q. Is there an onboard web GUI on the Cisco Catalyst 3850?

A. There is no onboard web GUI with the Cisco Catalyst 3850. This might be added later as part of a software update.

Maybe it should say there is a bit of one but it doesn't work. :-)

richard-marlow
Level 1
Level 1

When connecting to the Web interface A warning page is shown stating that the latest version of OS supported is Windows Vista and the Browser is IE7. This seems bizzare as this product was released this year!

I want to avoid any claim that this issue is caused because I have been connecting from a Windows 7 machine using Firefox. I have therefor created a virtual WinXP machine which installs with IE6. When connecting to the Web UI the warning page is not displayed but I am still stuck on the express setup page. Screenshot below.

mgas
Cisco Employee
Cisco Employee

Here is confirmation that GUI is not yet supported on 3850 and will be added later on as IOS update:

http://www.cisco.com/en/US/prod/collateral/switches/ps5718/ps12686/qa_c67-722110.html

Cheers

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Innovations in Cisco Full Stack Observability - A new webinar from Cisco