01-27-2015 04:54 AM - edited 03-07-2019 10:24 PM
All,
I got 4 3750 series switch stack member , plan was remove one switch that is 2nd switch in stack member which was stack master . the uplink trunks configured on the first switch member that is Gi 1/0/49 & Gi 1/0/50 .
Once 2 nd stack member switch removed , and connected SFP on the port Gi 1/0/49 - trunk was not coming up , would like to understand , once the 2nd stack member switch removed from the stack , it will become a master and retain all configuration including ports that is Gi 1/0/1-52 to Gi 4/0/1-52
before removing the switch switch provision command exist , my thinking the removed switch also have all the provision commands on the switch and with all port configuration Gi 1/0/1-52 to Gi 4/0/1 -52 ?? please suggest
switch 1 provision ws-c3750e-48pd
switch 2 provision ws-c3750e-48pd
switch 3 provision ws-c3750e-48pd
switch 4 provision ws-c3750e-48pd
Regards
Lerner
Solved! Go to Solution.
01-27-2015 06:45 AM
duplicate post
01-27-2015 06:45 AM
duplicate post
01-28-2015 12:03 PM
thank you , we tested yesterday during installation it holds sw# port number that is G 2/0/1 -48 , renumbered the switch , got through , thanks again
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: