Hi ,
We were unable to upgrade the IOS of 4500 R+E switch with SUP 7 L-E.
Trying to upgrade from 3.5.3 to 3.6.4 . Initially tried to upgrade the secondary supervisor. But it couldn't boot from the new IOS. IOS upgrade struck with the below message.
******** The system will autoboot now ********
config-register = 0x2102
Autobooting using BOOT variable specified file.....
Current BOOT file is --- bootflash:cat4500e-universal.SPA.03.06.04.E.152-2.E4.bin
*
Loading image !!!!!!!!!!!!!!!!!!!!!!
Checking digital signature....
[bootflash:/cat4500e-universal.SPA.03.06.04.E.152-2.E4.bin]
Digitally Signed Release Software with key version A
Rommon reg: 0x00004F80
Reset2Reg: 0x00000F00
*
Image load status: 0x00000003
####
Radtrooper 064 controller 0x047F4140..0x0498FCDA Size:0x00661EDC
Program Done!
######################
[ 0.061905] pci 0000:00:00.0: ignoring class b20 (doesn't match header type 01)
Starting System Services
udevd-work[1201]: rename(/dev/dcsflash.udev-tmp, /dev/dcsflash) failed: No such file or directory
diagsk10-post version 5.1.4.1
prod: WS-X45-SUP7L-E part: 73-14453-04 serial: ###########
Power-on-self-test for Module 3: WS-X45-SUP7L-E
CPU Subsystem Tests ...
seeprom: Pass
Traffic: L3 Loopback ...
Test Results: Pass
Traffic: L2 Loopback ...
Test Results: Pass
post done(54 secs)
Exiting to ios...
Loading gsbu64atomic as gdb64atomic
Loading r8a66597_hcd
Using 3 for MTS slot
Platform Manager: starting in standalone mode (standby)
**************************************************************************************************************************
Once i reverted to the existing IOS it's working fine immediately.
Thanks in Advance......
