07-19-2007 05:20 PM - edited 03-05-2019 05:23 PM
My office has a SupIII (WS-X4014) that we're trying to install in a 4507R. However, we are finding conflitcting info from Cisco about their compatibility.
The 4500 Data Sheet doesn't list the SupIII as a compatible Sup Engine : http://www.cisco.com/en/US/products/hw/switches/ps4324/products_data_sheet0900aecd801792b1.html
But the Installation Guide for the 4500 says that it does (page 1-19 and 1-12): http://cisco.com/en/US/docs/switches/lan/catalyst4500/hardware/installation/guide/78-14409-08/4500inst.html
Any help or clarification is appreciated!
07-19-2007 06:26 PM
The second link mentions that it does because the 4503 and 4506, but it won't work on the 4507R as the first link states.
Please see another link :)
http://cisco.com/en/US/docs/switches/lan/catalyst4500/hardware/module/guide/01overvw.html
"Supervisor Engine III (WS-X4014), which is used in the Catalyst 4006, 4503, and 4506 switches"
07-19-2007 06:31 PM
Hi Christopher
I think it's a typo in the second document. I agree with Edison and would add a further link to back it up.
http://www.cisco.com/en/US/products/hw/switches/ps4324/products_tech_note09186a008063c36f.shtml
HTH
Jon
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide