4507R+E when conneted 10G fiber sup status led goes orange

[MD KAFINUZZAMAN]

MY core switch 4507R+E

(cat4500es8-UNIVERSAL-M), Version 03.03.00.XO RELEASE SOFTWARE (fc2)

'WS-X45-SUP8-E'

when I connected distribution switch 10G cable then LED collor goes green to orange and after 3 to 4 hours I cant ping to any interface without managemenet ip

[Leo Laohoo]

Possibly means the interface has gone into error-disable. 

Can you kindly post the output to the command "sh interface status err"?

[MD KAFINUZZAMAN]

Thanks for your response...

CSw1#sh interfaces status err

showing nothing...

ervery after 4 hours core switch not responding . when I restart it then it goes normal and after 4 hours again it not responding.

and sup status led which is green normaly when I connect DS SW then it goes to amber color..

waiting for your reply..

[MD KAFINUZZAMAN]

waiting for  response...........

[Marvin Rhoads]

Did you look at the document I referenced and can you answer the question I asked?

[MD KAFINUZZAMAN]

Dear Marvin,

I have solve this problem.I have updated IOS cat4500es8-universal.SPA.03.03.01.XO.151-1.XO1.bin and set MTU on both side and now working fine .

Thanks for your response.

[rosaho]

This discussion has been reposted from Additional Communities to the LAN, Switching and Routing community.

[Marvin Rhoads]

Which LED goes orange?

The LED status codes are in this document.

Your syslog entries (or a PC connected to a console port) will give you more details on what is happening on the device.