03-05-2009 09:19 AM - last edited on 03-25-2019 04:05 PM by ciscomoderator
Have installed some Netflow daughter cards on SUP4's. Code rev is 12.2.25ewa10. Cards were installed Jan 31st and no issues were seen. Netflow isn't even enabled right now. I'm just not sure what is causing such high CPU on that process?
CPU utilization for five seconds: 88%/1%; one minute: 83%; five minutes: 84%
PID Runtime(ms) Invoked uSecs 5Sec 1Min 5Min TTY Process
30 346822128 120654753 2874 62.41% 56.18% 57.19% 0 Cat4k Mgmt LoPri
29 162373880 458524072 354 9.25% 9.16% 8.95% 0 Cat4k Mgmt HiPri
54 266972088 107767335 2477 8.37% 10.24% 10.29% 0 Spanning Tree
27 42139652 60577941 695 1.91% 1.52% 1.47% 0 Per-Second Jobs
60 45757540 76205530 600 1.75% 1.63% 1.60% 0 IP Input
150 5687764 6529600 871 0.63% 0.41% 0.41% 0 RIP Send
18 16161936 39711963 406 0.47% 0.48% 0.47% 0 ARP Input
Solved! Go to Solution.
03-05-2009 12:15 PM
This might give some insight .
http://www.cisco.com/en/US/products/hw/switches/ps663/products_tech_note09186a00804cef15.shtml
03-05-2009 12:15 PM
This might give some insight .
http://www.cisco.com/en/US/products/hw/switches/ps663/products_tech_note09186a00804cef15.shtml
03-05-2009 12:25 PM
Thanks! Yes, I realized that this traffic is actually normal.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide