Solved: 4510 slot 10 support

g.hammond · ‎11-30-2009

I have a 4510 switch and have WS-X4248-RJ45V modules in slots 3 - 9. When I try to insert the same kind of module in slot 10, I get a module not supported error. Is this card actually not supported in slot 10 or am I missing something. By the way, I am running 12.2(25)EWA2. Here's the error: %C4K_CHASSIS-3-LINECARDNOTVALIDINSLOT: Module (Field Replaceable Unit minor type 343) is not supported in slot 10

Jon Marshall · ‎12-01-2009

g.hammond wrote:

Thanks. This helps a lot. Can you lead me to any documentation about what is supported? How many ports? That kind of thing?

Thanks,

Do you have a supervisor V in the chassis ? If so have a look at this doc - Table 1 and read the footnote under the table -

http://www.cisco.com/en/US/prod/collateral/switches/ps5718/ps4324/product_data_sheet09186a00801fcaba_ps2797_Products_Data_Sheet.html

Jon

View solution in original post

Reza Sharifi · ‎11-30-2009

It does not look like this module is supported in slot 10 due to the insufficient number of backplane ports in this slot.

Refer to this document for more info:

http://www.cisco.com/en/US/docs/switches/lan/catalyst4500/12.2/25ew/system/message/emsg.html

HTH

Reza

g.hammond · ‎12-01-2009

Thanks. This helps a lot. Can you lead me to any documentation about what is supported? How many ports? That kind of thing?

Thanks,

Jon Marshall · ‎12-01-2009

g.hammond wrote:

Thanks. This helps a lot. Can you lead me to any documentation about what is supported? How many ports? That kind of thing?

Thanks,

Do you have a supervisor V in the chassis ? If so have a look at this doc - Table 1 and read the footnote under the table -

http://www.cisco.com/en/US/prod/collateral/switches/ps5718/ps4324/product_data_sheet09186a00801fcaba_ps2797_Products_Data_Sheet.html

Jon

View solution in original post

g.hammond · ‎12-01-2009

Yep. That pretty much is the issue. Thanks for the quick response.