09-20-2012 09:11 AM - edited 03-07-2019 08:59 AM
I am updating the iOS for a 4948 the bootflash is empty so all i can get into is the rommon. There is no option for xmodem. How can I put the iOS onto this device???
rommon 7 >?
alias set and display aliases command
boot boot up an external process
clear clear configurations, use 'clear help' for more info
confreg configuration register utility
dev list the device table with physical device information
dir list filesystem information
help monitor builtin command help
history monitor command history
macstats print management port MAC statistics counters
meminfo main memory information
ping ping utility to determine network connectivity
repeat repeat a monitor command
reset system reset
set show/set environment vars, use 'set help' for more info
sprom serial eprom operations
sysret print out info from last system return
unalias unset an alias
unset unset a monitor variable
version display Rom Monitor version information
^^^^^this is the only options i have^^^^
Solved! Go to Solution.
09-20-2012 09:27 AM
Hi Joe,
There is no Xmodem support on this switch. Use management port for TFTP.
Here is the step-by-step procedure:
Kind Regards,
Ivan Shirshin
**Please grade this post if you find it useful.
09-20-2012 09:27 AM
Hi Joe,
There is no Xmodem support on this switch. Use management port for TFTP.
Here is the step-by-step procedure:
Kind Regards,
Ivan Shirshin
**Please grade this post if you find it useful.
09-20-2012 10:45 AM
thank you that worked
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide