I have a working configuration for PBR on a 6500 running 12.2.33SXH8b.
Like I said, PBR works exactly as I want it to. The thing is when I start adding more traffic to the PBR (only 3 route-map classes) at some point CPU goes to 90+% and we start losing traffic. I was under the impression that in this version hardware-assisted PBR was supported and I shouldn't be seeing this behavior with the CPU.
Listen: https://smarturl.it/CCRS9E24 Follow us: https://twitter.com/CiscoChampion
Cisco Radio Aware Routing addresses several of the challenges faced when merging IP routing and radio communications in mobile networks, especially those exhibiti...
Listen: https://smarturl.it/CCRS9E23 Follow us: https://twitter.com/CiscoChampion The Wi-Fi 6E Catalyst 9136 access point takes advantage of the 6-GHz band to produce a network that is more reliable and secure, with higher throughput, more ...
When moving from OSPFv2 to OSPFv3, there are many changes in the format of the LSAs Type, but the most known changes are: IP prefix informations are no longer carried in Type-1 LSA and Type-2 LSA, new LSAs Type 8 and 9 are added to carry these prefixes.
Read a preview of my book OSPF The ultimate for CCIE Enterprise and Infrastructure exam in Books Google Doc.
Read a preview of my book OSPF The ultimate for CCIE Enterprise and Infrastructure exam in Books Google Doc #CCIE #Cisco #exam #Enterprise ...
Question 1: What are the OSPF Loop Prevention Mechanisms
In single area, the routers have the Link State Database, having the same LSDB helps the routers to build a loop-free topology.
Now in a multiarea topology, the ABRs are respon...