09-29-2011 08:18 AM - edited 03-07-2019 02:31 AM
We have a 6509 Chassis (WS-C6509) with Sup720
Questions below
Is this hardware (Chassis) supported or is end of life ?
I have used the link below but they mention 6509 and not WS-C6509 just wanted to double check if the meant the same ?
http://www.cisco.com/en/US/products/hw/switches/ps708/prod_models_comparison.html
We have used this hardware for the last 7 years are they any know issues with the hardware or is it good practice to the move to the latest Chassis to avoid suprises ?
Solved! Go to Solution.
09-29-2011 08:51 AM
Disclaimer
The Author of this posting offers the information contained within this posting without consideration and with the reader's understanding that there's no implied or expressed suitability or fitness for any purpose. Information provided is for informational purposes only and should not be construed as rendering professional advice of any kind. Usage of this posting's information is solely at reader's own risk.
Liability Disclaimer
In no event shall Author be liable for any damages whatsoever (including, without limitation, damages for loss of use, data or profit) arising out of the use or inability to use the posting's information even if Author has been advised of the possibility of such damage.
Posting
The -E chassis comes with standard with the high speed fans to allow sup720s to be installed (earlier chassis can be upgraded).
The -E chassis also provides 80 Gbps per slot for the sup2t.
09-29-2011 08:28 AM
They are the same thing..
WS-C6509 is the part number for the chassis.
Sup 720 is a few years old. The newest Sup module is Sup-2T
HTH
09-29-2011 08:42 AM
Thanks for your swift response
Are they any know problem with the physical Chasis WS-C6509 with the black plain etc ?
Any Advantages for us to migrate to 6509-E Chassis ?
09-29-2011 08:47 AM
It depends what you are trying to do. What features you want to add and use.
Have a look at this link. It does a good comparisom of different sup modules and what they support:
http://www.cisco.com/en/US/products/hw/switches/ps708/prod_models_comparison.html
HTH
09-29-2011 08:51 AM
Disclaimer
The Author of this posting offers the information contained within this posting without consideration and with the reader's understanding that there's no implied or expressed suitability or fitness for any purpose. Information provided is for informational purposes only and should not be construed as rendering professional advice of any kind. Usage of this posting's information is solely at reader's own risk.
Liability Disclaimer
In no event shall Author be liable for any damages whatsoever (including, without limitation, damages for loss of use, data or profit) arising out of the use or inability to use the posting's information even if Author has been advised of the possibility of such damage.
Posting
The -E chassis comes with standard with the high speed fans to allow sup720s to be installed (earlier chassis can be upgraded).
The -E chassis also provides 80 Gbps per slot for the sup2t.
09-29-2011 04:03 PM
Is this hardware (Chassis) supported or is end of life ?
EOS for Selective Cisco Catalyst 6503,Catalyst 6506 and Catalyst 6509 Chassis
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide